rsync ssh를 이용한 서버 백업
원본서버 : original server
백업 서버 : backup server
기본 원리
ssh 방식으로 접속하기 위해서 백업 서버에서 키를 생성하고 생성된 키를 원본 서버에 복사를 한 다음 rsync를 ssh 방식으로 접속하여 백업을 받는 방법이다.
*주의 : 원본서버에서 키를 생성하는게 아니라 백업서버에서 키를 생성해야 한다.
백업 서버에서 일반계정이나 root로 로그인 후 키를 저장할 디렉토리를 생성한다.
[root@#backup server]# chmod 700 .ssh
백업 서버에서 디렉토리 생성후 키를 생성한다.
Generating public/private dsa key pair.
Enter file in which to save the key (/root/.ssh/id_dsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
원본 서버에서 일반계정으로 로그인하여 백업서버에서 생성한 키를 저장하기 위해 디렉토리를 생성한다.
[xxxx@#original server]# chmod 700 .ssh
다시 백업서버로 이동해서 백업서버에서 생성한 키를 원본 서버에 저장한다.
xxxx@xxx.xxx.xxx.xxx password: 계정암호 입력
이제 준비는 끝났고 백업 서버에서 rsync를 ssh로 연결하여 백업하면 끝.
xxxx@xxx.xxx.xxx.xxx password: 원본 서버 계정 암호 입력
rsync 설명
rsync version 2.6.8 protocol version 29
Copyright (C) 1996-2006 by Andrew Tridgell, Wayne Davison, and others.
< http://rsync.samba.org/>
Capabilities: 64-bit files, socketpairs, hard links, ACLs, xattrs, symlinks, batchfiles,
inplace, IPv6, 64-bit system inums, 64-bit internal inums
rsync comes with ABSOLUTELY NO WARRANTY. This is free software, and you
are welcome to redistribute it under certain conditions. See the GNU
General Public Licence for details.
rsync is a file transfer program capable of efficient remote update
via a fast differencing algorithm.
Usage: rsync [OPTION]... SRC [SRC]... DEST
or rsync [OPTION]... SRC [SRC]... [USER@]HOST:DEST
or rsync [OPTION]... SRC [SRC]... [USER@]HOST::DEST
or rsync [OPTION]... SRC [SRC]... rsync://[USER@]HOST[:PORT]/DEST
or rsync [OPTION]... [USER@]HOST:SRC [DEST]
or rsync [OPTION]... [USER@]HOST::SRC [DEST]
or rsync [OPTION]... rsync://[USER@]HOST[:PORT]/SRC [DEST]
The ':' usages connect via remote shell, while '::' & 'rsync://' usages connect
to an rsync daemon, and require SRC or DEST to start with a module name.
Options
-v, --verbose increase verbosity
-q, --quiet suppress non-error messages
-c, --checksum skip based on checksum, not mod-time & size
-a, --archive archive mode; same as -rlptgoD (no -H)
--no-OPTION turn off an implied OPTION (e.g. --no-D)
-r, --recursive recurse into directories
-R, --relative use relative path names
--no-implied-dirs don't send implied dirs with --relative
-b, --backup make backups (see --suffix & --backup-dir)
--backup-dir=DIR make backups into hierarchy based in DIR
--suffix=SUFFIX set backup suffix (default ~ w/o --backup-dir)
-u, --update skip files that are newer on the receiver
--inplace update destination files in-place (SEE MAN PAGE)
--append append data onto shorter files
-d, --dirs transfer directories without recursing
-l, --links copy symlinks as symlinks
-L, --copy-links transform symlink into referent file/dir
--copy-unsafe-links only "unsafe" symlinks are transformed
--safe-links ignore symlinks that point outside the source tree
-k, --copy-dirlinks transform symlink to a dir into referent dir
-K, --keep-dirlinks treat symlinked dir on receiver as dir
-H, --hard-links preserve hard links
-p, --perms preserve permissions
-E, --executability preserve the file's executability
-A, --acls preserve ACLs (implies --perms)
-X, --xattrs preserve extended attributes (implies --perms)
--chmod=CHMOD change destination permissions
-o, --owner preserve owner (super-user only)
-g, --group preserve group
--devices preserve device files (super-user only)
--specials preserve special files
-D same as --devices --specials
-t, --times preserve times
-O, --omit-dir-times omit directories when preserving times
--super receiver attempts super-user activities
-S, --sparse handle sparse files efficiently
-n, --dry-run show what would have been transferred
-W, --whole-file copy files whole (without rsync algorithm)
-x, --one-file-system don't cross filesystem boundaries
-B, --block-size=SIZE force a fixed checksum block-size
-e, --rsh=COMMAND specify the remote shell to use
--rsync-path=PROGRAM specify the rsync to run on the remote machine
--existing ignore non-existing files on receiving side
--ignore-existing ignore files that already exist on receiving side
--remove-sent-files sent files/symlinks are removed from sending side
--del an alias for --delete-during
--delete delete files that don't exist on the sending side
--delete-before receiver deletes before transfer (default)
--delete-during receiver deletes during transfer, not before
--delete-after receiver deletes after transfer, not before
--delete-excluded also delete excluded files on the receiving side
--ignore-errors delete even if there are I/O errors
--force force deletion of directories even if not empty
--max-delete=NUM don't delete more than NUM files
--max-size=SIZE don't transfer any file larger than SIZE
--min-size=SIZE don't transfer any file smaller than SIZE
--partial keep partially transferred files
--partial-dir=DIR put a partially transferred file into DIR
--delay-updates put all updated files into place at transfer's end
-m, --prune-empty-dirs prune empty directory chains from the file-list
--numeric-ids don't map uid/gid values by user/group name
--timeout=TIME set I/O timeout in seconds
-I, --ignore-times don't skip files that match in size and mod-time
--size-only skip files that match in size
--modify-window=NUM compare mod-times with reduced accuracy
-T, --temp-dir=DIR create temporary files in directory DIR
-y, --fuzzy find similar file for basis if no dest file
--compare-dest=DIR also compare destination files relative to DIR
--copy-dest=DIR ... and include copies of unchanged files
--link-dest=DIR hardlink to files in DIR when unchanged
-z, --compress compress file data during the transfer
--compress-level=NUM explicitly set compression level
-C, --cvs-exclude auto-ignore files the same way CVS does
-f, --filter=RULE add a file-filtering RULE
-F same as --filter='dir-merge /.rsync-filter'
repeated: --filter='- .rsync-filter'
--exclude=PATTERN exclude files matching PATTERN
--exclude-from=FILE read exclude patterns from FILE
--include=PATTERN don't exclude files matching PATTERN
--include-from=FILE read include patterns from FILE
--files-from=FILE read list of source-file names from FILE
-0, --from0 all *-from/filter files are delimited by 0s
--address=ADDRESS bind address for outgoing socket to daemon
--port=PORT specify double-colon alternate port number
--sockopts=OPTIONS specify custom TCP options
--blocking-io use blocking I/O for the remote shell
--stats give some file-transfer stats
-8, --8-bit-output leave high-bit chars unescaped in output
-h, --human-readable output numbers in a human-readable format
--progress show progress during transfer
-P same as --partial --progress
-i, --itemize-changes output a change-summary for all updates
--log-format=FORMAT output filenames using the specified format
--password-file=FILE read password from FILE
--list-only list the files instead of copying them
--bwlimit=KBPS limit I/O bandwidth; KBytes per second
--write-batch=FILE write a batched update to FILE
--only-write-batch=FILE like --write-batch but w/o updating destination
--read-batch=FILE read a batched update from FILE
--protocol=NUM force an older protocol version to be used
-4, --ipv4 prefer IPv4
-6, --ipv6 prefer IPv6
--version print version number
(-h) --help show this help (-h works with no other options)
Use "rsync --daemon --help" to see the daemon-mode command-line options.
Please see the rsync(1) and rsyncd.conf(5) man pages for full documentation.
See http://rsync.samba.org/ for updates, bug reports, and answers
